Connect your Exness account to Titans

About 15 minutes. You keep your funds at Exness; Titans only gets the API access you give it.

Not affiliated with Exness. Titans Trade is an independent product and is not affiliated with, sponsored by or endorsed by Exness. Exness is a trademark of its owner. This guide describes the Titans side only. Exness controls the API-key part: follow the current instructions in Exness's own API documentation and in the API section of your Exness Personal Area. Menus and steps there can change, and we do not guess at them.

Before you start

  • An Exness trading account of type Exness Pro on the Exness server. This is not an MT5 account. Try a demo account first.
  • A Titans account (free is enough to follow along).
  • For auto-trading, a MAX plan. PRO and free plans use Titans for signals only.

Steps

  1. Create your Titans account and confirm your email

    Sign up at the app, then click the link in the confirmation email. You cannot link a broker account until your email is confirmed.

  2. Turn on two-factor authentication (recommended)

    In Security, scan the QR code with an authenticator app, enter a code and store the 10 recovery codes somewhere safe. With 2FA on, saving or replacing broker credentials asks for a fresh code.

  3. Use an Exness Pro trading account on the Exness server (not MT5)

    At Exness, open or choose a trading account of type Exness Pro on the Exness server. Do not use an MT5 account: Titans connects through the Exness API, not through MetaTrader 5, so an MT5 account is the wrong kind of account for this connection.

  4. Prepare your Exness API credentials

    This part happens at Exness, not in Titans. Follow the current instructions in Exness's own API documentation and the API section of your Exness Personal Area. You will end up with an account ID, an API key (a public identifier) and an Ed25519 private key.

  5. Open Broker Accounts and choose New Account

    The Broker Accounts page is available on plans that connect a broker (MAX for auto-trading). Give the connection a name you will recognise, for example "Exness Real 1".

  6. Enter the account ID, API key and private key

    Account ID: your Exness trading account number. API key: the public key identifier from Exness (it typically starts with exnsk). Private key: PEM, base64 or hex are all accepted. Leave the gateway host as https://api.exness.com unless Exness tells you otherwise.

  7. Press Test connection

    Titans signs a request with your key, finds the right access point for your account and reads the account. On success you see the balance, equity and leverage. Nothing is traded and nothing is saved by this test.

  8. Save and enable the account

    Save the account and keep Enabled ticked. From this moment the private key is write-only: Titans can use it, but no page or API can display it again.

  9. Start in Signal mode, then move to Auto

    Leave the platform in Signal mode first and watch the alerts for a while, ideally on an Exness demo account. Only when you are comfortable, switch to Auto mode (MAX plan).

Handling the Exness side safely

We cannot walk you through screens we cannot verify, but these rules hold whatever Exness's current flow looks like:

  • Generate the key pair yourself on your own device if Exness's flow lets you. The private key should never be created by, or sent through, a third party.
  • Register only the public part with Exness if their flow asks for a public key. The private key stays with you until you paste it into Titans.
  • Grant the minimum permission needed: reading the account and trading. Do not enable anything Titans does not need.
  • Never share the private key with anyone, including Titans support and Exness support. Neither will ever need it from you by chat or email.
  • Keep an offline copy of the key in a password manager. Titans cannot show it to you again.

What your plan allows

Once connected, your plan's limits apply to every order:

  • PRO: 1 account, XAUUSD and BTCUSD, signals only, balance limit $2,000 per account.
  • MAX: up to 2 accounts, all symbols, auto-trading, up to 0.50 lot per trade, 1.50 lots in total, 4 concurrent trades and a balance limit of $20,000 per account.

Lots and trades are counted across all of your accounts together. An order larger than the room left is reduced to fit, or declined if it would be below the minimum lot. See pricing for the full table.

Changing or rotating your credentials

Credentials are write-only. To replace a key, open the account, paste the new private key and save: the old one is overwritten. Leave the private-key field empty to keep the stored one. If you have 2FA enabled you will be asked for a code. If you suspect a key has leaked, revoke it at Exness first, then overwrite it here, and use "log out everywhere" in Security.

If the connection test fails

  • Wrong key format or truncated key: paste the whole private key (PEM with its header lines, or the full base64 or hex string) with no extra spaces or line breaks added.
  • Account ID mismatch: the ID must be the trading account the key was issued for, not your Exness profile or login number. It must also be an Exness Pro account on the Exness server, not an MT5 account.
  • Wrong API key: the API key is the public identifier; make sure it pairs with the private key you pasted.
  • Clock skew: requests are signed with a timestamp. If your Exness-side tooling or the server clock is off by minutes, signatures can be rejected; sync your clock if you test from your own machine.
  • Key without the needed permission: a key that cannot read or trade the account will connect poorly or fail on orders. Check its permissions at Exness.
  • Email not confirmed: saving credentials is blocked until you confirm your email.
  • Still stuck? Write to taititansofficial@gmail.com without ever including your private key.

Automated trading can lose money quickly. Start in Signal mode, test on demo and read the risk disclosure. See also the FAQ and how credentials are protected.

Open the app